End Dump

End dump refers to how the trailer is emptied. The large, multi-stage cylinder at the font of the trailer is used to lift the front of the box until the material slides out the rear.

Tipping the box high enough to empty the load raises the center of gravity quite high. This unstable situation can reach a critical point on slanted or unstable ground that can ultimately cause the trailer to fall over.

The advantage of end dumps is that they are very simple, both hydraulically and mechanically. This simplicity directly translates to lower maintenance and capital cost vs a live bottom or scrolling belt trailer.


Useful options

  • Tarping system

  • Plastic liners

  • Steel liners

  • Alternate axle combination

  • Alternate lengths

End Dump

Length46 ft
Width102 inch
Weight20,490 lbs – 9,294 kg
Capacity64.0 m3
Minimum hydraulic requirements: -Pressure 2,200 psi (151.7 bar)
-Flow 10 US gal/min (38 L/min)
-Tank Volume 70 US gal (265 L)
Time to unload with a 45 US gal/min (170 L/min) PTO80 seconds

Get In Touch

Tel- (819) 723-2416

Fax- (819) 723-2467


91 rue Ontario

Qc, J0Z 3B0



Open Hours

Mon: 8am - 5pm
Tue: 8am - 5pm
Wed: 8am - 5pm
Thur: 8am - 5pm
Fri: 8am - 5pm
Sat: Closed
Sun: Closed

Send A Message